Jiangyin Longkang Metal Products Co., Ltd
Jiangyin Longkang Metal Products Co., Ltd
Add to Cart
Wholesale Price Staircase Aluminum Handrail Profiles For 100% Safety
Basic Information
| | |
| | Aluminum profile |
| | |
| | |
| | |
| | As customer's requestments |
| | |
Product Display
It mainly uses acidic or alkaline solution to chemically react with oxides and oil stains on the surface of the workpiece to dissolve it in an acidic or alkaline solution to remove rust, oxide scale and oil stains on the surface of the workpiece, and then use nylon. The brush roller or 304# stainless steel wire (the wire brush roller made of acid and alkali resistant solution can be cleaned to achieve the purpose. Chemical treatment is suitable for cleaning thin plate parts, but the disadvantage is: if the time is not properly controlled, even if the corrosion inhibitor is added, It can also cause over-corrosion of steel. For more complex structural parts and parts with holes, after acid pickling, the residual acid immersed in the gaps or holes is difficult to completely remove. If it is not handled properly, it will become the corrosion of the workpiece. In addition, the chemicals are volatile, and the cost is high. The chemical discharge after treatment is difficult. If it is not handled properly, it will cause serious pollution to the environment. With the improvement of people's awareness of environmental protection, this treatment method is being replaced by mechanical treatment.
(1) Electroplating
In the electrolyte solution, the workpiece is the cathode, and the process of forming a coating on the surface under the action of an external current is called electroplating. The plating layer can be metal, alloy, semiconductor or containing various solid particles, such as copper plating, nickel plating, etc.
(2) Oxidation
In the electrolyte solution, the workpiece is the anode, and the process of forming an oxide film on the surface under the action of an external current is called anodization, such as anodization of aluminum alloys.
Certificates and Honors
Factory display
Company Profile
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.
Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.
FAQ
Q: How to place an order?
A: First let us know your requirement or application.
Secondly, we quote according to your request or our suggestion.
Third, the customer confirms the sample and makes a deposit for the formal order.
Finally we arrange production.
Q: Are all color products the same finish?
A: No. With powder coatings, bright colors will be higher than white or gray. Regarding the price of anodizing, the color will be higher than the silver, and the black will be higher than the color.